Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
The Journal of Mechanical Science and Technology, Volume 24, Number 1, 2010
Tribology issues in nanoimprint lithography
Kwang-Seop Kim/Jae-Hyun Kim/Hak-Joo Lee/Sang-Rok Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.5-12, 2010
Next generation actuators leading breakthroughs
Toshiro Higuchi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.13-18, 2010
Kinematics and optimization of a 2-DOF parallel manipulator with a passive constraining leg and linear actuators
Ji-Hoon Lee/Yun-Joo Nam/Myeong-Kwan Park
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.19-23, 2010
Development of nutation motors (improvement of pneumatic nutation motor by optimizing diaphragm design)
Shinji ODA/Koichi SUZUMORI/Kazuo UZUKA/Isao ENOMOTO
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.25-28, 2010
A study on the bending stress of the hollow sun gear in a planetary gear train
Kyung-Eun Ko/Do-Hyeong Lim,/Pan-Young Kim/Jinsoo Park
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.29-32, 2010
Simulation results of a hexahedron-octahedron based spherical stepping motor
Tomoaki Yano
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.33-36, 2010
An analysis of the main factors on the wear of brushes for automotive small brush-type DC motor
Wae-Gyeong Shin/Soo-Hong Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.37-41, 2010
Development of a spherical motor driven by electro-magnets
Seiji Ikeshita/Akio Gofuku/Tetsushi Kamegawa/Takakazu Nagai
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.43-46, 2010
Continuous path control of a 5-DOF parallel-serial hybrid robot
Takuma Uchiyama/Hidetsugu Terada/Hironori Mitsuya
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.47-50, 2010
Development of an In-pipe micro mobile robot using peristalsis motion
Yuichi NAKAZATO/Yukihiro SONOBE/Shigeki TOYAMA
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.51-54, 2010
Gait generation and change of direction for the underactuated three-legged robot
Kazunori Kaede/Keiichi Watanuki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.55-58, 2010
Nanotribological properties of silicon nano-pillars coated by a Z-DOL lubricating film
Duc Cuong Pham/Kyunghwan Na/Sungwook Yang/Jinseok Kim/Eui-Sung Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.59-65, 2010
Environmentally friendly tribology (Eco-tribology)
Shinya Sasaki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.67-71, 2010
Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation
Byung-Min Kim/Chan-Joo Lee/Jung-Min Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.73-76, 2010
Study on tool wear mechanisms in milling laser sintered material
Abdullah Yassin/Takashi Ueda/Tatsuaki Furumoto/Mohd Sanusi Abdul Aziz/Ryutaro Tanaka/Akira Hosokawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.77-80, 2010
Investigation of temperature and thermal stress in ventilated disc brake
Pyung Hwang/Xuan Wu
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.81-84, 2010
Friction and wear properties of rice husk ceramics under dry condition¢Ó
Tuvshin Dugarjav/Takeshi Yamaguchi/Kei Shibata/Kazuo Hokkirigawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.85-88, 2010
Tribological behavior of Fe-based bulk metallic glass¢Ó
Beom-Taek Jang/Seong-Hoon Yi/Seock-Sam Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.89-92, 2010
Effect of a dynamic absorber on friction-induced vibration of a rectangular plate
Hiroki Mori/Oleksandr Mikhyeyev/Takuo Nagamine/Mizue Mori/Yuichi Sato
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.93-96, 2010
Assessment of adhesion between thin film and silicon based on a scratch test
Jung-Eun Lee/Hyun-Joon Kim/Dae-Eun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.97-101, 2010
Surface durability of WC/C-coated case-hardened steel gear
Masahiro Fujii/Masanori Seki/Akira Yoshida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.103-106, 2010
Nanomechanical characteristics at an ultra-small particle-surface contact interface
In-Ha Sung/Hung-Gu Han/Hosung Kong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.107-110, 2010
High-pressure behavior and tribological properties of wind turbine gear oil
Sobahan Mia*, Shota Mizukami, Ryusei Fukuda, Shigeki Morita and Nobuyoshi Ohno
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.111-114, 2010
Sensitivity study of frictional behavior by dimensional analysis in cold forging
Joseph S. Ajiboye/Ki-Ho Jung/Yong-Taek Im
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.115-118, 2010
Effect of micro-scale Young¡¯s modulus and surface roughness on adhesion property to plasma-treated rubber surface
Jong-Hyoung Kim/Noritsugu Umehara/Hiroyuki Kousaka/Mamoru Shimada/Mitsuru Hasegawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.119-122, 2010
Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets
Chan-Joo Lee/Jae-Young Kim/Sang-Kon Lee/Dae-Cheol Ko/Byung-Min Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.123-126, 2010
Study on laser assisted milling of ferrous based consolidated material
Tatsuaki Furumoto/Takashi Ueda/Teruyuki Osaka/Abdullah Yassin/Akira Hosokawa/Ryutaro Tanaka
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.127-130, 2010
Deformation behavior of commercial Mg-Al-Zn-Mn type alloys under a hydrostatic extrusion process at elevated temperatures
Duk-Jae Yoon, Sangmok Lee*, Seong-Joo Lim and Eung-Zu Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.131-135, 2010
Application of flexible forming process to hull structure forming
Seong-Chan Heo/Young-Ho Seo/Jung-Won Park/Tae-Wan Ku/Jeong Kim/Beom-Soo Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.137-140, 2010
Surface durability of powder-forged roller treated by shot peening
Masanori Seki/Masahiro Fujii/Yuji Kobayashi/Masaaki Sato/Akira Yoshida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.141-144, 2010
Optimal injection molding conditions considering the core shift for a plastic battery case with thin and deep walls
Dong-Gyu Ahn/Dae-Won Kim/Yeol-Ui Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.145-148, 2010
Eliminating weldlines of an injection-molded part with the aid of high-frequency induction heating
Keun Park/Dong-Hwi Sohn/Kwang-Hwan Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.149-152, 2010
Airbag tool polishing for aspherical glass lens molds
Hocheol Lee/Junguk Kim/Hyunhyung Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.153-158, 2010
A practical approach for simulation and manufacturing of a ball-end mill using a 5-axis CNC grinding machine
Trung Thanh Pham/Sung Lim Ko
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.159-163, 2010
Indirect cutting force measurement in the micro end-milling process based on frequency analysis of sensor signals
Bong-Cheol Shin/Seok-Jae Ha/Myeong-Woo Cho/Tae-Il Seo/Gil-Sang Yoon/Young-Moo Heo
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.165-168, 2010
Product development with TRIZ: design evolution of deburring tools for intersecting holes
Chang-Hee Cho/Kwon-Hee Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.169-173, 2010
A new optical measurement system for determining the geometrical errors of rotary axis of a 5-axis miniaturized machine tool
Sung-Ryung PARK/Trung-Kien HOANG/Seung-Han YANG
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.175-179, 2010
Fabrication and characterization of PMN-PT single crystal cantilever array for cochlear-like acoustic sensor
S. Hur/S.Q. Lee/H.S. Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.181-184, 2010
Prediction of the resistance coefficient in a segment ball valve
Jin-Hwan Lee/Kwon-Hee Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.185-188, 2010
The Development of gearless reducers with rolling balls
Hidetsugu Terada
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.189-195, 2010
Active inspection supporting system based on mixed reality after design and manufacture in an offshore structure
Jung-Min Lee/Kyung-Ho Lee/Dea-Seok Kim/Chung-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.197-202, 2010
Simultaneous temperature measurements of bearing and seal parts of a swash plate type axial piston pump - effects of piston clearance and fluid property
Toshiharu Kazama/Hayato Sasaki/Yukihito Narita
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.203-206, 2010
A novel design of active accelerator pedal using linear electromagnetic actuator
Jae-Yong Lee/Jin-Ho Kim/Sang-Min Woo/Jeh-Won Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.207-210, 2010
Fast drive of displacement magnification mechanism with flexure hinge using loading type impact damper
Nobuhiko Henmi/Yuta Sumi/Michihiko Tanaka
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.211-214, 2010
Robust design of railway vehicle suspension using a process capability index
Kwang-Ki Lee/Chan-Kyoung Park/Seung-Ho Han
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.215-218, 2010
Fabrication and evaluation of various types of micro one-way valves through micro rubber molding process
Yuki UOHASHI/Koichi SUZUMORI/Hironari TANIGUCHI
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.219-222, 2010
Vibration transmissibility reduction module with flexure mechanism for personal tools
Donghyun Hwang/Deuk-Kyu Lee/Jaehwa Jeong/Moon G. Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.223-226, 2010
Behavior of piston rings passing over cylinder ports in two-stroke cycle engines
Kohei Nakashima/Yuki Nakano/Soichi Ishihara/Yoshio Murakami/Masago Yamamoto
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.227-230, 2010
Design of magnetically levitated rotors in a large flywheel energy storage system from a stability standpoint
Seong-yeol Yoo/Wook-ryun Lee/Yong-chae Bae/Myounggyu Noh
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.231-235, 2010
Augmented reality-based training system for metal casting
Keiichi Watanuki/Lei Hou
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.237-240, 2010
Selective laser sintering of PCL/TCP composites for tissue engineering scaffolds
Haseung Chung/Haeseong Jee/Suman Das
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.241-244, 2010
Development of a walking assist machine using crutches (Composition and basic experiments)
Masaru HIGUCHI/Makoto OGATA/Shuta SATO/Yukio TAKEDA
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.245-248, 2010
Computational fluid analysis of abrasive waterjet cutting head
Md. G. Mostofa/Kwak Yong Kil/Ahn Jung Hwan
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.249-252, 2010
Synchronized presentation of odor with airflow using olfactory display
Haruka Matsukura/Hitoshi Yoshida/Takamichi Nakamoto/Hiroshi Ishida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.253-256, 2010
Development of virtual reality-based universal design review system
Keiichi Watanuki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.257-262, 2010
Simultaneous control of the motion and stiffness of redundant closed-loop link mechanisms with elastic elements
Nobuyuki Iwatsuki/Takanori Kotte/Koichi Morikawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.258-288, 2010
The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam
Dae-Suk Han/In-Beom Park/Myung-Hyun Kim/Byeong-Jae Noh/Wha-Soo Kim/Jae-Myung Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.263-266, 2010
Study on recycling of waste water from spent water-soluble coolant
Kazuya Takada/Yasuo Kondo/Kenji Yamaguchi/Satoshi Sakamoto
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.267-270, 2010
Analysis of eccentricity in the ball bar measurement
Dong-Mok LEE/Young-Taek CHA/Seung-Han YANG
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.271-274, 2010
Selection of an optimized method for pitting processes with sustainability as an important factor
Ryuichi Saitoh/Hiroki Yamakiri/Tsuneo Kurita/Shinsuke Kondoh/Nozomu Mishima/Shinya Sasaki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.275-278, 2010
Reliability-based design optimization using convex approximations and sequential optimization and reliability assessment method
Tae Min Cho/Byung Chai Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.279-283, 2010
Development of a distributed geometric modeling system based on peer to peer
Sung-il Choi/Sangho Park/Murali Subramaniyam
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.289-292, 2010
Analysis on the ink transfer mechanism in R2R application
Sangwon Lee/Yang Na
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.293-296, 2010
Computer aided simulation of mesoscale particles mixing for direct printable ink
Dong Hoon Oh/Nam Soo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.297-300, 2010
An application of ESD technology for the R2R printing process
Jung Su Kim/Kyung Hyun Choi/Kang Dae Kim/Chung Hwan Kim/Sung Woo Bae/Dong Soo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.301-305, 2010
Simulation of droplet generation through electrostatic forces
Khalid Rahman/Jeong-Beom Ko/Saleem Khan/Dong-Soo Kim/Kyung-Hyun Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.307-310, 2010
Characterization for coating processes of imidazole powders using an ultrasonic atomizer
Jun-Sik Lee/Jun-Ki Kim/Mok-Soon Kim/Jong-Hyun Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.311-314, 2010
Quality control with matching technology in roll to roll printed electronics
Changwoo Lee/Hyunkyoo Kang/Hojoon Kim/Ho Anh Duc Nguyen/Keehyun Shin
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.315-318, 2010
Steering guide-based lateral control for roll-to-roll printed electronics
Hyeunhun Shin/Thanhtam Ho/Sangyoon Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.319-322, 2010
Optimum suspension unit design for enhancing the mobility of wheeled armored vehicles
Eun-Ho Choi/Jae-Bong Ryoo/Jin-Rae Cho/O-Kaung Lim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.323-330, 2010
Differential quadrature application in post-buckling analysis of a hinged-fixed elastica under terminal forces and self-weight
O. Sepahi/M.R. Forouzan/P. Malekzadeh
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.331-336, 2010
Dynamic problem of generalized thermoelastic diffusive medium
Rajneesh Kumar/Tarun Kansal
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.337-342, 2010
Novel design of a small field robot with multi-active crawlers capable of autonomous stair climbing
Byeong-Sang Kim/Quy-Hung Vu/Jae-Bok Song/Chung-Hyuk Yim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.343-350, 2010
Development of analytical process to reduce side load in strut-type suspension
Y. I. Ryu/D. O. Kang/S. J. Heo/H. J. Yim/J. I. Jeon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.351-356, 2010
A semi-analytical solution for forced vibrations response of rectangular orthotropic plates with various boundary conditions
Rahbar Ranji A./Rostami Hoseynabadi H.
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.357-364, 2010
Sonar-based obstacle avoidance using region partition scheme
T. T. Quyen Bui/Keum-Shik Hong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.365-372, 2010
Stiffness modeling of a family of 6-DoF parallel mechanisms with three limbs based on screw theory
Bing Li/Hongjian Yu/Zongquan Deng/Xiaojun Yang/Hong Hu
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.373-382, 2010
Mathematical models for manufacturing a novel gear shaper cutter
Shen-Wang Lin/Cheng-Shun Han/Jiu-Bin Tan/Shen Dong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.383-390, 2010
Cross direction register modeling and control in a multi-layer gravure printing
Hyun-Kyoo Kang, Chang-Woo Lee, Jae-Min Lee, Kee-Hyun Shin
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.391-397, 2010
Effect of boost pressure on thermal stratification in HCCI engine using the multi-zone model
O Seok Kwon/Ock Taeck Lim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.399-406, 2010
The optimum solidification and crucible rotation in silicon czochralski crystal growth
Hyomin Jeong/Yonghun Lee/Myoungkuk Ji/Gyeonghwan Lee/Hanshik Chung
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.407-414, 2010
Behavior of thermal bubbles formed from a single nucleation site
Young Soo Chang/Kwang-Hun Jeong/Heon Ju Lee/Yoon Pyo Lee/Ho-Young Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.415-420, 2010
TR-PIV measurement of separated and reattaching turbulent flow over a surface-mounted square cylinder
Liu Liu SHI/Ying Zheng LIU/Jin Jin WAN
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.421-428, 2010
Unsteady boundary layer for a pitching airfoil at low Reynolds numbers
Dong-Ha Kim/Jo-Won Chang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.429-440, 2010
A numerical study on the flow and mixing in a microchannel using magnetic particles
Thanh Nga Le/Yong Kweon Suh/Sangmo Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.441-450, 2010
 
 
 
 
 
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org