Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
Geometric optimization for a thermal microfluidic chip

Meysam Rahmat and Pascal Hubert*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2143-2150, 2010

Abstract : A geometric design for a microfluidic chip using numerical simulation is presented. Finite element method was employed in order to design the microchannel configuration for a microfluidic chip array. The effect of geometry on the thermal response at the interface between the microfluidic chips and an integrated system, such as a micro-electronic device, was investigated. Dimensionless design charts, obtained from the parametric models, demonstrated that a compromise between a maximum heat transfer and a minimum interface temperature was achieved with an equilateral triangle cross-section at a microchannel spacing to width ratio of two. The transient response of the microfluidic chip implied that the transient analysis corresponded to the steady state results under different boundary conditions.

Keyword : Finite element; Heat transfer; Microchannel; Steady state; Transient

 
 
 
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org