| |
|
|
|
|
|
|
| |
|
| |
 |
|
| |
|
|
| |
| Categories |
|
|
| Thermal and Power Engineering |
|
Numerical study of power generation by reverse electrodialysis
Dong-Kwon Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.5-10, 2011 |
|
|
Synthesis of single-walled carbon nanotubes using laser-vaporized metal nanoparticle catalyst
Masamichi Kohno*, Teppei Kawahara, Masahiro Tomoda, Yasuyuki Takata, Shuhei Inoue, Shinzo Suzuki, Shigeo Maruyama
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.11-15, 2011 |
|
|
Efficient white organic light-emitting diodes with mixed electron transporting layers
Ji Hoon Seo, Jung Sun Park, Suk Jae Lee, Bo Min Seo, Kum Hee Lee, Jung Keun Park, Seung Soo Yoon, Young Kwan Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.17-19, 2011 |
|
|
DSMC scheme to study phonon dynamics
Yusuke Masao*, Masaya Okano, Mitsuhiro Matsumoto
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.21-26, 2011 |
|
|
Thermal rectification of asymmetrically-defective materials
Hiroyuki Hayashi, Yohei Ito and Koji Takahashi*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.27-32, 2011 |
|
|
Process optimization of preparing honeycomb-patterned polystyrene filmsby breath figure method
Yanqiong Zheng, Yuki Kubowaki, Makoto Kashiwagi, Koji Miyazaki*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.33-36, 2011 |
|
|
Effect of liquid bulk density on thermal resistance at a liquid-solid interface
Minsub Han
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.37-42, 2011 |
|
|
Fabrication of semi-transparent super-hydrophobic surface based on silica hierarchical structures
Ping-Hei Chen*, Chin-Chi Hsu, Pei-Shan Lee, Chao-Sung Lin
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.43-47, 2011 |
|
|
Optimal operation strategy development for fuel cell hybrid vehicle
D. J. Xuan, J. W. Kim, Y. B. Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.183-192, 2011 |
|
|
Application of thermosyphon air-preheater for energy thrift from a furnace in a hot forging process
L. Yodrak, S. Rittidech*, N. Poomsa-ad
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.193-200, 2011 |
|
|
Variable fuzzy control for heat pump operation
Eunjun Cho* Manyeong Ha, Sedong Chang, Yoonjei Hwang
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.201-208, 2011 |
|
|
Determination of the optical depth of a DI diesel spray
Francisco Payri, Jose Vicente Pastor, Raul Payri*, Julien Manin
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.209-219, 2011 |
|
|
Optical investigation of the fuel injector influence in a PFI spark ignition engine for two-wheel vehicles
Simona Silvia Merola*, Cinzia Tornatore and Paolo Sementa
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.223-233, 2012 |
|
|
Investigation of thermo-structural behaviors of different ventilation applications on brake discs
Mesut Duzgun*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.235-240, 2012 |
|
|
System development and analysis for producing high quality gas and activated sludge char
Young Nam Chun*, Seong Cheon Kim and Kunio Yoshikawa
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.241-250, 2012 |
|
|
Effect of working-fluid filling ratio and cooling-water flow rate on the performance of solar collector with closed-loop oscillating heat pipe
Kim-Bao Nguyen, Seok-Hun Yoon and Jae Hyuk Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.251-258, 2012 |
|
|
Flow dynamics at the minimum starting condition of a supersonic diffuser to simulate a rocket’s high altitude performance on the ground
Hong-Gye Sung
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.254-261, 2009 |
|
|
Implementation of adaptive indoor comfort temperature control via embedded system for air-conditioning unit
Thananchai Leephakpreeda*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.259-268, 2012 |
|
|
An investigation on effect of high pressure post injection on soot and NO emissions in a DI diesel engine
Kamran Poorghasemi*, Fathollah Ommi, Hamed Yaghmaei and Amin Namaki
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.269-281, 2012 |
|
|
Turbulence modeling of natural convection in enclosures: A review
Seok-Ki Choi* and Seong-O Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.283-297, 2012 |
|
|
Effect of boost pressure on thermal stratification in HCCI engine using the multi-zone model
O Seok Kwon/Ock Taeck Lim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.399-406, 2010 |
|
|
The optimum solidification and crucible rotation in silicon czochralski crystal growth
Hyomin Jeong/Yonghun Lee/Myoungkuk Ji/Gyeonghwan Lee/Hanshik Chung
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.407-414, 2010 |
|
|
Behavior of thermal bubbles formed from a single nucleation site
Young Soo Chang/Kwang-Hun Jeong/Heon Ju Lee/Yoon Pyo Lee/Ho-Young Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.415-420, 2010 |
|
|
Molecular dynamics study on bulk melting induced by ultrashort pulse laser
Byoung Seo Lee, Seungho Park, Young Ki Choi, Joon Sik Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.449-456, 2011 |
|
|
A numerical study on the performance of polymer electrolyte membrane fuel cells due to the variation in gas diffusion layer permeability
Seung Man Baek, Soo Gon Koh, Kwang Nam Kim, Jung Ho Kang, Jin Hyun Nam, Charn-Jung Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.457-467, 2011 |
|
|
Evaluation of gas path analysis methods for gas turbine diagnosis
A. G. Stamatis *
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.469-477, 2011 |
|
|
Laser repetitive pulse heating and melt pool formation at the surface
S. Z. Shuja, B. S. Yilbas*, O. Momin
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.479-487, 2011 |
|
|
Combustion and emission characteristics of HCNG in a constant volume chamber
Seang-Wock Lee*, Han-Seung Lee, Young-Joon Park, Yong-Seok Cho
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.489-494, 2011 |
|
|
Experimental investigation of a process cooling system retrofitted with HFC-404A refrigerant for precise manufacturing application
Fu-Jen Wang*, Kuei-I Tsai,Yao-Jun Wang, Hao-Chuan Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.495-501, 2011 |
|
|
Experimental research on thermal comfort in the university classroom of regular semesters in Korea
Gun Joo Jung*, Sung Ki Song, Young Chull Ahn, Geun Sug Oh, Young Bin Im
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.503-512, 2011 |
|
|
Optimal disc cutters plane layout design of the full-face rock tunnel boring machine (tbm) based on a multi-objective genetic algorithm
Junzhou Huo/Wei Sun/Jing Chen/Pengcheng Su/Liying Deng
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.513-520, 2010 |
|
|
Experimental measurement and numerical computation of the air side convective heat transfer coefficients in a plate fin-tube heat exchanger
Jin Gi Paeng
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.536-543, 2009 |
|
|
Measurements of air temperature distribution and optimum cooling condition inside the computer system
Dae Hee Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.544-549, 2009 |
|
|
Influence of steam injection through exhaust heat recovery on the design performance of solid oxide fuel cell – gas turbine hybrid systems
Sung Ku Park
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.550-558, 2009 |
|
|
Defect diagnostics of SUAV gas turbine engine using hybrid SVM-artificial neural network method
Sang-Myeong Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.559-568, 2009 |
|
|
A suggestion to enhance pool boiling heat transfer on a vertical tube surface
Myeong-Gie Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.593-598, 2009 |
|
|
Two-phase flow heat transfer of propane vaporization in horizontal minichannels
Agus Sunjarianto Pamitran
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.599-606, 2009 |
|
|
A study on cooling efficiency using 1-d analysis code suitable for cooling system of thermoforming
Zhen-Zhe Li
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.607-613, 2009 |
|
|
Development of rapid mixing fuel nozzle for premixed combustion
Katsuki Masashi
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.614-623, 2009 |
|
|
Measurement of the heat transfer coefficient in the dimpled channel:effects of dimple arrangement and channel height
Somin Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.624-630, 2009 |
|
|
Experimental and numerical studies on the thermal analysis of the plate in indirectly fired continuous heat treatment furnace
Young-Deuk Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.631-642, 2009 |
|
|
Flow instability due to cryogenic cavitation in the downstream of orifice
Changjin Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.643-649, 2009 |
|
|
Modeling of laminar forced convection in spherical- pebble packed beds
Yaser Hadad and Khosrow Jafarpur*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.643-649, 2012 |
|
|
Improvement of flame stability and NOx reduction in hydrogen-added ultra lean premixed combustion
Eun-Seong Cho
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.650-658, 2009 |
|
|
Numerical evaluation of NOx mechanisms in methane-air counterflow premixed flames
Eun-Seong Cho
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.659-666, 2009 |
|
|
A new method to evaluate the influence coefficient matrix for gas path analysis
Di Xia
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.667-676, 2009 |
|
|
Defect diagnostics of gas turbine engine using hybrid SVM-ANN with module system in off-design condition
Dong-Hyuck Seo
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.677-685, 2009 |
|
|
Investigation on thermal characteristics of heat sinks for power module using STM
Chung-Hyo Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.686-697, 2009 |
|
|
Experimental study on heat transfer characteristics of internal heat exchangers for CO2 system under cooling condition
Young Chul Kwon
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.698-706, 2009 |
|
|
Numerical simulation on soot deposition process in laminar ethylene diffusion flames under a microgravity condition
Jae Hyuk Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.707-716, 2009 |
|
|
Inter-laboratory correlation exercise on a light-duty diesel passenger vehicle to verify nano-particle emission characteristics by Korea particle measurement program
Cha-Lee Myung
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.729-738, 2009 |
|
|
Experimental investigations on impaction pin nozzles for inlet fogging system
Abhilash Suryan/ Yong Kwan Yoon/ Dong Sun Kim/ Heuy Dong Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.839-845, 2011 |
|
|
Thermal characteristics of louvered fins with a low-reynolds number flow
Nat Vorayos/Tanongkiat Kiatsiriroat
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.845-850, 2010 |
|
|
Predicting yearly energy recovery and dehumidification enhancement with a heat pipe heat exchanger using typical meteorological year data in the tropics
Yat Huang Yau/ Mohammad Ahmadzadehtalatapeh
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.847-853, 2011 |
|
|
Lubrication characteristics of a rotary compressor used for refrigeration and air-conditioning systems (the influence of alternative refrigerants)
Ihn-Sung Cho/Jae-Youn Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.851-856, 2010 |
|
|
Laser cutting of Kevlar laminates: First and second law analysis
Bekir S. Yilbas*, Ahmet Z. Sahin, C. Chatwin, Tahir Ayar
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.855-862, 2011 |
|
|
An experimental approach to turbulent heat transfer using a symmetric expanded plane channel
Sang-Kyu Park/Terukazu Ota
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.857-863, 2010 |
|
|
The absolute metastable limit of liquids under tension-A review
Ho-Young Kwak, Ki-Moon Kang, Ilgon Ko
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.863-869, 2011 |
|
|
Characteristics of vertically injected buoyant jets of highly diluted propane
K. W. Chun/J. Kim/S. H. Won/S. H. Chung
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.865-871, 2010 |
|
|
Introducing a dimensionless number as tank selector in hybrid solar thermal energy storage systems
Zaeem Moosavi Mohamadi* , Hassan Zohoor
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.871-876, 2011 |
|
|
Cooling performance of R510A in domestic water purifiers
Ki-Jung Park/Yohan Lee/Dongsoo Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.873-878, 2010 |
|
|
Magnetic field effect on laminar heat transfer in a pipe for thermal entry region
Asadolah Malekzadeh*, Amir Heydarinasab, Mohammad Jahangiri
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.877-884, 2011 |
|
|
Performance of R170/R1270 mixture under air-conditioning and heat pumping conditions
Ki-Jung Park/Yohan Lee/Dongsoo Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.879-885, 2010 |
|
|
Qualitative and quantitative analysis of spray characteristics of diesel and biodiesel blend on common-rail injection system
Ainul Ghurri*, Kim Jae-duk, Song Kyu-Keun, Jung Jae-Youn, Kim Hyung Gon
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.885-893, 2011 |
|
|
A study on energy saving of cooling/reheating system using compact heat exchanger
Seong-Yeon Yoo/Jin-Hyuck Kim/Myoung-Seok Jie
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.887-892, 2010 |
|
|
Thermal performance analysis of heat exchanger for closed wet cooling tower using heat and mass transfer analogy
Seong-Yeon Yoo/Jin-Hyuck Kim/Kyu-Hyun Han
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.893-898, 2010 |
|
|
An analytical solution to heat conduction with a moving heat source
Chi-Kyung Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.895-899, 2011 |
|
|
Thermodynamic second law analysis for a gravity-driven variable viscosity liquid film along an inclined heated plate with convective cooling
O. D. Makinde
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.899-908, 2010 |
|
|
Experimental study on optimization of over-fire air in modified combustion condition with selective catalytic reduction
Wook Kim*, Dong-Jun Lee, Song-Woon Park
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.901-909, 2011 |
|
|
Modeling of aluminum particle combustion with emphasis on the oxide effects and variable transport properties
Heesung Yang/Woongsup Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.909-921, 2010 |
|
|
Boundary and thermal non-equilibrium effects on convective instability in an anisotropic porous layer
I.S. Shivakumara, Jinho Lee*, A.L. Mamatha, M. Ravisha
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.911-921, 2011 |
|
|
Performance Investigation of Heat Pipe Using Aqueous Solution of n-Pentanol with Different Inclinations
R. Senthilkumar*, S. Vaidyanathan, B. Sivaraman
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.923-929, 2011 |
|
|
An experimental study on the performance optimization of a radiant burner with a surface flame structure
S. W. Cho/Y. S. Kim/C. H. Jeon/Y. J. Chang
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.923-929, 2010 |
|
|
Stand-alone micro direct borohydride fuel cells using mixture of sodium borohydride and potassium hydroxide
Jong Pil Choi, Young Ho Seo*, Byeong Hee Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.931-935, 2011 |
|
|
Thermal analysis on the letter mark spot of the corvette Cheonan-hit torpedo
Tae-Ho Song*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.937-943, 2011 |
|
|
Analysis of operating characteristics of a polymer electrolyte membrane fuel cell coupled with an air supply system
Seung Won Ji, No Sung Myung, Tong Seop Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.945-955, 2011 |
|
|
Visualization of liquid water movement on the micro sub-channels of flow paths in a proton exchange membrane fuel cell cathode separator
Sanghoon Lee, Dong-Ho Rhee, Won Hyeng Pyen, Hyung Hee Cho*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.957-961, 2011 |
|
|
Heat transfer characteristics in latent heat storage system using paraffin wax
Stella P. Jesumathy, M. Udayakumar and S. Suresh
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.959-965, 2012 |
|
|
Effect of particle ingestion on the fouling reduction and heat transfer enhancement of a No-Distributor-Fluidized heat exchanger
Yongdu Jun
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.965-972, 2008 |
|
|
Adaptive finite element solution for the heat conduction with a moving heat source
Chi-Kyung Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.967-972, 2012 |
|
|
Thermo-fluid characterization of flue gas flows through a packed bed
Nat Vorayos
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.973-980, 2008 |
|
|
Parametric study on flow and heat transfer characteristics of porous wick evaporator based on AMTEC
Shuang-Ying Wu*, Bao-Xi Cao, Lan Xiao and You-Rong Li
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.973-981, 2012 |
|
|
Experimental study on the characteristics of longitudinal fin air-heating vaporizers in different seasons
Han Shik Chung
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.981-990, 2008 |
|
|
Multi-dimensional modeling of CO poisoning effects on proton exchange membrane fuel cells (PEMFCs)
Sukkee Um
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.991-998, 2008 |
|
|
A comparison of LII analysis results from numerical model and experiment at elevated surrounding pressures
Chung Hwan Jeon
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1154-1162, 2008 |
|
|
Wet bar detection by using water absorption detector
Hee Soo Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1163-1173, 2008 |
|
|
Improvement and experimental validation of a multi-zone model for combustion and NO emissions in CNG fueled spark ignition engine
Omid Asgari*, Siamak Kazemzadeh Hannani and Reza Ebrahimi
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1205-1212, 2012 |
|
|
Numerical simulation of the effects of a suction line heat exchanger on vapor compression refrigeration cycle performance
Ji Hwan Jeong*, Sang-Goo Park, Debasish Sarker and Keun Sun Chang
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1213-1226, 2012 |
|
|
An experimental study on the transition criteria of open channel natural convection flows
Bong-Jin Ko, Min-Hwan Kim and Bum-Jin Chung*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1227-1234, 2012 |
|
|
Analysis of the combustion oscillation in a silo-type gas turbine combustor and its suppression
Seok Bin Seo, Dal Hong Ahn, Jong Ho Park and Dong Jin Cha*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1235-1240, 2012 |
|
|
Performance and emission characteristics of a low heat rejection spark ignited engine fuelled with E20
C. Ramesh Kumar* and G. Nagarajan
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1241-1250, 2012 |
|
|
Study of the regenerator constituting material influence on a gamma type Stirling engine
Ramla Gheith, Fethi Aloui* and Sassi Ben Nasrallah
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1251-1255, 2012 |
|
|
A numerica1 study of fluid flow and heat transfer in different microchannel heat sinks for electronic chip cooling
Shanglong Xu*, Guangxin Hu, Jie Qin and Yue Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1257-1263, 2012 |
|
|
Experimental analysis of emission reduction by the split injection strategy using close post injection with a double-row nozzle in heavy EGR conditions
Jeongwoo Lee, Seungmok Choi, Seunghyup Shin, Hoimyung Choi and Kyoungdoug Min*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1265-1274, 2012 |
|
|
Dynamic behavior of flexible sensory hair in an oscillating flow
Byung Kyu Park* and Joon Sik Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1275-1282, 2012 |
|
|
Forced convection heat transfer of steam in a square ribbed channel
Jiazeng Liu, Jianmin Gao and Tieyu Gao*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1291-1298, 2012 |
|
|
Evaluation of a hot oil immersion drying method for the upgrading of crushed low-rank coal
Tae-In Ohm*, Jong-Seong Chae, Jae-Ho Lim and Sung-Hyun Moon
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1299-1303, 2012 |
|
|
Comparison of DME HCCI operating ranges for the thermal stratification and fuel stratification based on a multi-zone model
Dongwon Jung, Oseock Kwon and Ock Taeck Lim*
The Journal of Mechanical Science and Technology, vol. 25 , no. 6, pp.1383-1390, 2011 |
|
|
Comparative study on heat transfer characteristics of nanofluidic thermosyphon and grooved heat pipe
Dong-Ryun Shin, Seok-Ho Rhi*, Taek-Kyu Lim and Ju-Chan Jang
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1391-1398, 2011 |
|
|
Mode change design for capacity modulation in reciprocating compressor
Jong-Bong Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1391-1399, 2008 |
|
|
Numerical simulation and design of a parabolic trough solar collector used as a direct generator in a solar-GAX cooling cycle
Daniel Sauceda*, Nicolás Velázquez, Octavio García-Valladares and Ricardo Beltrán
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1399-1408, 2011 |
|
|
Numerical solution of radiative transfer within a cubic enclosure filled with nongray gases using the WSGGM
Won-Hee Park
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1400-1407, 2008 |
|
|
A low aspect ratio electrothermal gun for metal plasma vapor discharge and ceramic nanopowder production
Kyoungjin Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1408-1416, 2008 |
|
|
Delay of ignition in early direct-injected PCCI engine combustion using fuel-evaporative cooling and cooled EGR
Yongha Sung, Gilsung Jung and Myung Taeck Lim*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1409-1414, 2011 |
|
|
Experimental study on steady state heating performance of a multi-type heat pump system for finding the optimum control variable
Jong Won Choi, Il Hwan Lee and Min Soo Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1415-1422, 2011 |
|
|
Numerical analysis on the performance of cooling plates in a PEFC
Yongchan Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1417-1425, 2008 |
|
|
A numerical study on parameter control for remelted coating processes
Uwe Fuessel and Minh-Quy Le*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1423-1428, 2011 |
|
|
Inverse estimation of properties for charring material using a hybrid genetic algorithm
Hee-Chul Chang, Won-Hee Park, Kyung-Beom Yoon, Tae-Kuk Kim*, Duck-Hee Lee and Woo-Sung Jung
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1429-1437, 2011 |
|
|
Numerical investigation on developing laminar forced convective heat transfer and entropy generation in an annular helicoidal tube
Shuang-Ying Wu*, Su-Jun Chen, Lan Xiao1 and You-Rong Li
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1439-1447, 2011 |
|
|
Wind power potential and characteristic analysis of Chiang Mai, Thailand
Tanate Chaichana, Sumpun Chaitep
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1475-1479, 2010 |
|
|
Development of the reference model for a residential heat pump system for cooling mode fault detection and diagnosis
Minsung Kim, Seok Ho Yoon, W. Vance Payne, Piotr A. Domanski
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1481-1489, 2010 |
|
|
Comparison of experimental and predicted atomization characteristics of high-pressure diesel spray under various fuel and ambient temperature
Su Han Park, Hyung Jun Kim, Chang Sik Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1491-1499, 2010 |
|
|
Experimental study on nanofludic heat pipe hot chuck plate in semiconductor wafer baking process
Taek-Kyu Lim, Seok-Ho Rhi
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1501-1509, 2010 |
|
|
Interfacial effect on thermal conductivity of diamond-like carbon films
Jong Wook Kim, Ho-Soon Yang, Young Ha Jun, Kyung Chun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1511-1514, 2010 |
|
|
Interpretation of coal gasification modeling in commercial process analysis simulation codes
Hookyung Lee, Sangmin Choi, Minsu Paek
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1515-1521, 2010 |
|
|
Natural convection heat transfer estimation from a longitudinally finned vertical pipe using CFD
Hyo Min Jeong
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1517-1527, 2009 |
|
|
Experimental study of frost growth on a horizontal cold surface under forced convection
Lingyan Huang, Zhongliang Liu, Yaomin Liu, Yujun Gou
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1523-1529, 2010 |
|
|
A study on performance improvement of corrugated type total heat exchanger considering the structure of flow passage on surface
Kyungmin Kwak
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1528-1535, 2009 |
|
|
Study on the radiative transfer through non-gray gas mixtures within an irregular 3-D enclosure by using the modified weighted sum of gray gas method
Kyung-Beom Yoon, Hee-Chul Chang, Tae-Kuk Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1531-1536, 2010 |
|
|
Design and analysis of a twisting-type thermal actuator for micromirrors
Dong Hyun Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1536-1543, 2009 |
|
|
Effect of buoyancy on soot formation in gas-jet diffusion flame
Byoung-Ho Jeon, Jae Hyuk Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1537-1543, 2010 |
|
|
Optimization of rapid thermal processing for uniform temperature distribution on wafer surface
Hyuck-Keun Oh
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1544-1552, 2009 |
|
|
Mathematical modelling and experimental investigation on sun and solar drying of white mulberry
Ebru Akpinar Kavak
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1544-1553, 2008 |
|
|
Theoretical and numerical analyses of a ceramic monolith heat exchanger
Jin Gi Paeng, Young Hwan Yoon, Kyung Hwan Kim, Keon Sik Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1545-1551, 2010 |
|
|
Dry and wet air-side performance of a louver-finned heat exchanger having flat tubes
Nae-Hyun Kim, Soo-Hwan Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1553-1561, 2010 |
|
|
Finite volume method analysis of heat transfer problem using adapted strongly implicit procedure
Abel Rouboa
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1553-1562, 2009 |
|
|
Study on the Concentration of CO by the Length and the Variation of the Bent tube of the Exhaust pipe for the Household Boiler
Sahwan Leem
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1554-1560, 2008 |
|
|
Investigation of Gas Flow Characteristics in Proton Exchange Membrane Fuel Cell
Honggun Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1561-1567, 2008 |
|
|
Molecular dynamic simulation of the melting and solidification processes of argon
Jae Dong Chung
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1563-1570, 2009 |
|
|
Characteristics of the Cooling Water Fouling in a Heat Exchanging System
Sun-Kyung Sung
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1568-1575, 2008 |
|
|
Output power characteristic of WEC for a buoy
Jin-Seok Oh
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1571-1575, 2009 |
|
|
Heat transfer rate of a closed-loop oscillating heat pipe with check valves using silver nanofluid as working fluid
S. Wannapakhe
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1576-1582, 2009 |
|
|
Optimal Design for Hybrid Rocket Engine for Air Launch Vehicle
Changjin Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1576-1585, 2008 |
|
|
A logical explanation of the concept of energy and the energy conservation principle
Pyung Suk Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1583-1590, 2009 |
|
|
Supercritical Droplet Dynamics and Emission in Low Speed Cross-Flows
Woongsup Yoon
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1586-1601, 2008 |
|
|
Experimental investigation of nanoparticle formation characteristics from advanced gasoline and diesel fueled light duty vehicles under different certification driving modes
Hyungmin Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1591-1601, 2009 |
|
|
Study on Operating Characteristics of Fuel Cell Powered Electric Vehicle with Different Air Feeding Systems
Kyoungdoug Min
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1602-1611, 2008 |
|
|
Analysis of the combustion instability of a model gas turbine combustor by the transfer matrix method
Dong Jin Cha
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1602-1612, 2009 |
|
|
Bypass line assisted start-up of a loop heat pipe with a flat evaporator
Joon Hong Boo
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1613-1619, 2009 |
|
|
Numerical study of droplet dynamics in a PEMFC gas channel with multiple pores
Jiyoung Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1765-1772, 2009 |
|
|
Strengths of horseshoe vortices around a circular cylinder with an upstream cavity
K. J. Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1773-1778, 2009 |
|
|
Lie group analysis of radiation natural convection heat transfer past an inclined porous surface
J. Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1779-1784, 2008 |
|
|
Friction-induced ignition modeling of energetic materials
Min-cheol Gwak
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1779-1787, 2009 |
|
|
Diagnosis of the behavior characteristics of the evaporative diesel spray by using images analysis
Jeongkuk Yeom
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1785-1792, 2008 |
|
|
Evaporation of inkjet printed pico-liter droplet on heated substrates with different thermal conductivity
Taewoong Lim
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1788-1794, 2009 |
|
|
Size distributions and number concentrations of particles from the DOC and CDPF
Byunchul Choi
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1793-1799, 2008 |
|
|
Direct numerical simulation of multiphase flow for arbitrary geometry using level contour reconstruction method
Seungwon Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1795-1800, 2009 |
|
|
Comparison between numerical computations and measurements by LDV for fluid flow in rectangular duct systems
Kyung Hwan Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1800-1807, 2008 |
|
|
Study on the light receiving characteristics of a compact solar power generation system with a plant shoot shape
Shin’ya Obara
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1801-1807, 2009 |
|
|
Effects of initial parameters on the internal-melt ice-on-tube while icing
Bingxi Li
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1808-1812, 2009 |
|
|
A numerical study of the fluid flow and heat transfer around a single row of tubes in a channel using immerse boundary method
Changmin Son
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1808-1820, 2008 |
|
|
Measurement of three-dimensional flame structure by combined laser diagnostics
Takashi Ueda
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1813-1820, 2009 |
|
|
Temperature measurement of microfluids with high temporal resolution by laser-induced fluorescence
Masahiro Motosuke
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1821-1828, 2009 |
|
|
Analysis of low Reynolds number flow around a heated circular cylinder
László Baranyi
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1829-1834, 2009 |
|
|
Hydraulics conveyances of mud slurry by a spiral pipe
Yanuar
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1835-1839, 2009 |
|
|
Hydrodynamic plane and axisymmetric slip stagnation-point flow with thermal radiation and temperature jump
Jing Zhu1,*, Liancun Zheng1 and Xinxin Zhang2
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1837-1844, 2011 |
|
|
The effect of blade angle on the flow and pressure distributions in the vicinity of the diffuser blades of a room air conditioner
Hyeon-Seok Seo
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1840-1845, 2009 |
|
|
Decomposition of PFC gas using a water jet plasma
Mun Sup Lim, Seong Cheon Kim and Young Nam Chun*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1845-1851, 2011 |
|
|
Removal of submicron aerosol particles and bioaerosols using carbon fiber ionizer assisted fibrous medium filter media
Jae-Hong Park
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1846-1851, 2009 |
|
|
Effects of injection type on slot film cooling for a ramjet combustor
Kwang Hoon Park
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1852-1857, 2009 |
|
|
Numerical simulations of the combustor for waste insulating oil containing polychlorinated biphenyls
Hyun-Kyeong Kim, Jong-Seung Chae, Seung-Soo Park, Hi-Soo An, Kyoungyoun Kim and Tae-In Ohm*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1853-1859, 2011 |
|
|
A numerical study on oil retention and migration characteristics in the heat pump system
Jong Won Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1858-1865, 2009 |
|
|
Influence of thermal management and integration with turbomachinery on the performance of polymer electrolyte membrane fuel cell system
Seung Won Ji, Byung Joon Ryu, Sung Ku Park and Tong Seop Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1861-1870, 2011 |
|
|
Investigation of emission characteristics affected by new cooling system in a diesel engine
Kyung-Wook Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1866-1870, 2009 |
|
|
Energy and exergy analysis of kalina cycle system (KCS) 34 with mass fraction ammonia-water mixture variation
Nasruddin
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1871-1876, 2009 |
|
|
A simulation for prediction of nitrogen oxide emissions in lean premixed combustor
Doyong Lee, Jungkyu Park*, Jaemin Jin and Minchul Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1871-1878, 2011 |
|
|
Numerical analysis of flow characteristics of fire extinguishing agents in aircraft fire extinguishing systems
Jintaek Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1877-1884, 2009 |
|
|
On the effective temperature and Reynolds number concept for a heated circular cylinder: commentary of the article by Baranyi et al.
Z. Trávníček and A.-B. Wang*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1881-1884, 2011 |
|
|
The effect of chemical structure of dimethyl ether (DME) on NOx formation in nonpremixed counterflow flames
Tae-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1885-1892, 2009 |
|
|
Condensation heat transfer coefficients of HFC245fa on a horizontal plain tube
Ki-Jung Park, Dong Gyu Kang, Dongsoo Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1911-1917, 2010 |
|
|
Mixed convection of power-law fluids along a vertical wedge with convective boundary condition in a porous medium
Waqar A. Khan, Rama Subba Reddy Gorla
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1919-1925, 2010 |
|
|
Fundamental study of NOx removal from diesel exhaust gas by dielectric barrier discharge reactor
Tran Quang Vinh, Shuya Watanabe, Tomohiko Furuhata and Masataka Arai*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1921-1928, 2012 |
|
|
Numerical analysis of entropy generation in concentric curved annular ducts
Haydar Kucuk
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1927-1937, 2010 |
|
|
A numerical analysis of the effects of a stratified pre-mixture on homogeneous charge compression ignition combustion
Narankhuu Jamsran and Ock Taeck Lim*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1929-1935, 2012 |
|
|
Conjugated heat transfer and temperature distributions in a gas turbine combustion liner under base-load operation
Kyung Min Kim, Namgeon Yun, Yun Heung Jeon, Dong Hyun Lee, Hyung Hee Cho, Sin-Ho Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1939-1946, 2010 |
|
|
Optimal operating points of PEM fuel cell model with RSM
Dongji Xuan
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.1945-1951, 2009 |
|
|
Performance analyses of oxy-fuel power generation systems including CO2 capture: comparison of two cycles using different recirculation fluids
Sang Hyun Tak, Sung Ku Park, Tong Seop Kim, Jeong Lak Sohn, Young Duk Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1947-1954, 2010 |
|
|
Analytical solution of non-Fourier and Fourier bioheat transfer analysis during laser irradiation of skin tissue
H. Ahmadikia*, A. Moradi, R. Fazlali and A. Basiri Parsa
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1949-1955, 2012 |
|
|
Thermal behavior and entropy generation rate analysis of a viscous flow in MHD micropumps
Mehdi Kiyasatfar*, Nader Pourmahmoud, Mir Maqsood Golzan and Iraj Mirzaee
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1949-1955, 2012 |
|
|
Supercooling release of micro-size water droplets on microporous surfaces with cooling
ChunWan Park and Chaedong Kang*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1957-1962, 2012 |
|
|
An experimental study on stability rating of impinging-jet injectors using air injection in a subscale chamber
Chul Jin Kim and Chae Hoon Sohn*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1963-1970, 2012 |
|
|
Enhanced tubing thermal performance for innovative MSF system
A. Kalendar, T. Galal*, A. Al-Saftawi and M. Zedan
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1969-1977, 2011 |
|
|
Numerical analysis of the gas flow rate uniformity in the molten carbonate fuel cell (MCFC) under various conditions
Junhyun Cho, Han-Sang Kim, Kyoungdoug Min*, Jong Hoon Park, In Gab Chang and Tae Won Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1971-1978, 2012 |
|
|
A general exergy-based environmental impact index
Sósimo E. Díaz-Méndez1,*, José María Rodríguez-Lelis2 and Abel Hernández-Guerrero3
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1979-1985, 2011 |
|
|
Finite element simulation and experiments on a new induction heating bearing replacer
Li Guofa, Ren Xiaoli*, Wang Longshan and Zhang Donglin
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1987-1993, 2011 |
|
|
Aerodynamic design and performance analysis of multi-MW class wind turbine blade
Bumsuk Kim*, Woojune Kim, Sungyoul Bae, Jaehyung Park and Manneung Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1995-2002, 2011 |
|
|
Experimental and CFD analysis of heat sinks with base plate for CPU cooling
R. Mohan* and P. Govindarajan
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2003-2012, 2011 |
|
|
Achievement of geothermal energy using ground heat exchanger in Ma’en
Mohammed Awwad Ali Al-Dabbas*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2013-2023, 2011 |
|
|
Controlling the secondary flows near endwall boundary layer fences in a 90° turning duct using approximate optimization method
Jongjae Cho, Kuisoon Kim*, Jinhan Kim and Eunhwan Jeong
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2025-2034, 2011 |
|
|
An experimental study of acoustically driven medium-scale pool fires
Ki Yong Lee*, Andrew Lock and Anthony Hamins
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2035-2041, 2011 |
|
|
Influence of yield stress on free convective boundary-layer flow of a non-Newtonian nanofluid past a vertical plate in a porous medium
F. M. Hady, F. S. Ibrahim, S. M. Abdel-Gaied and M. R. Eid*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2043-2050, 2011 |
|
|
Oxy-fuel combustion boiler for CO2 capturing: 50 kW-class model test and numerical simulation
Joon Ahn,*, Hyouck Ju Kim and Kyu Sung Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2135-2141, 2010 |
|
|
Geometric optimization for a thermal microfluidic chip
Meysam Rahmat and Pascal Hubert*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2143-2150, 2010 |
|
|
Optimal design of high temperature vacuum furnace using response surface method
Zhen-Zhe Li
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2213-2217, 2008 |
|
|
Thermal fatigue estimation due to thermal stratification in the RCS branch line using one-way FSI scheme
Kwang-Chu Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2218-2227, 2008 |
|
|
Experimental verification of a solar hot water heating system with a spiral-jacketed storage tank
Douglas Reindl
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2228-2235, 2008 |
|
|
Transient free convection flow past an infinite vertical cylinder with thermal stratification
Rudra Kanta Deka and Ashish Paul*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2229-2237, 2012 |
|
|
Prediction of flame formation in highly preheated air combustion
Jang Sik Yang
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2236-2244, 2008 |
|
|
An experimental study on the effects of impingement-walls on the spray and combustion characteristics of SIDI CNG
Yu Liu, J. K. Yeom and S. S. Chung*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2239-2246, 2012 |
|
|
Steam explosion experiments using partially oxidized corium
J. H. Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2245-2253, 2008 |
|
|
Three-dimensional computational fluid dynamic analysis of the conventional PEM fuel cell and investigation of prominent gas diffusion layers effect
N. Ahmadi*, S. Rezazadeh, I. Mirzaee and N. Pourmahmoud
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2247-2257, 2012 |
|
|
Effects of various intake valve timings and spark timings on combustion, cyclic THC and NOX emissions during cold start phase with idle operation in CVVT engine
Kwanhee Choi
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2254-2262, 2008 |
|
|
Catalytic combustion behaviors of methane and propane over the PD-based catalyst in the BOP for MCFC power generation systems
Younhwa Lee and Man Young Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2259-2265, 2012 |
|
|
Measurement and simulation of pollutant emissions from marine diesel combustion engine and their reduction by exhaust gas recirculation
Nader Larbi
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2263-2273, 2008 |
|
|
Evidence for the importance of particle distribution in effective medium theory: a model study
Jae Sik Jin* and Joon Sik Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2267-2273, 2012 |
|
|
Experimental investigation of dynamic responses of a transparent PEM fuel cell to step changes in cell current density with operating temperature
Han-Sang Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2274-2285, 2008 |
|
|
Evaporation and disjoining pressure of ultrathin film on substrate: a molecular dynamics study
M. Han*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2275-2284, 2012 |
|
|
CO2 absorption characteristics of nanoparticle suspensions in methanol
Jung-Yeul Jung, Jae Won Lee and Yong Tae Kang*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2285-2290, 2012 |
|
|
Power managements of a hybrid electric propulsion system for UAVs
Bohwa Lee, Poomin Park, Chuntaek Kim*, Sooseok Yang and Seokmin Ahn
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2291-2299, 2012 |
|
|
Optimized performances comparison of organic Rankine cycles
Enhua Wang, Hongguang Zhang*, Boyuan Fan and Yuting Wu
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2301-2312, 2012 |
|
|
Modeling and fuzzy control of the engine coolant conditioning system in an IC engine test bed
Seyed Saeid Mohtasebi*, Farzad A. Shirazi, Ahmad Javaheri, Ghodrat Hamze Nava
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2323-2331, 2010 |
|
|
Accurate calculation of the pressure and temperature of water, steam, and ice: Formulation for CFD
Jang-Chang Lee*, Meng-Sing Liou
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2333-2340, 2010 |
|
|
Potential assessment of an innovative hybrid ventilator for building ventilation
Tzyy-hwang Shieh, Pei-Chi Chang, Che-ming Chiang, Chi-ming Lai*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2341-2345, 2010 |
|
|
Heat transfer performance of condenser tubes in an MSF desalination system
T. Galal*, A. Kalendar, A. Al-Saftawi, M. Zedan
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2347-2355, 2010 |
|
|
Prediction of thermal conductivities of laminated composites using penny-shaped fillers
Jae-Kon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2481-2488, 2008 |
|
|
A study on separate learning algorithm using support vector machine for defect diagnostics of gas turbine engine
Sang-Myeong Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2489-2497, 2008 |
|
|
Wet surface heat transfer and pressure drop of aluminum parallel flow heat exchangers at different inclination angles
Nae-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2498-2508, 2008 |
|
|
An investigation on the fuel behavior for a PFI type motorcycle engine
Hyungmin Kim/Kihyung Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2507-2513, 2009 |
|
|
Experimental investigation of mixing-enhanced swirl flows
Sam-Goo, Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2509-2515, 2008 |
|
|
The measurement of thermal conductivities using the photothermal deflection method for thin films with varying thickness
H. J. Kim/J. H. Kim/P. S. Jeon/J. Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2514-2520, 2009 |
|
|
Analysis of performance deterioration of a micro gas turbine and the use of neural network for predicting deteriorated component characteristics
Jae Eun Yoon
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2516-2525, 2008 |
|
|
Nonlinear behavior of micro bubbles under ultrasound due to heat transfer
Chansoo Lim/Jeong Eun Kim/Jae Young Lee/Ho-Young Kwak
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2521-2528, 2009 |
|
|
Investigation of variations of lubricating oil diluted by post-injected fuel for the regeneration of CDPF and its effects on engine wear
Bong-Ha Song
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2526-2533, 2008 |
|
|
A review of the critical heat flux condition in mini-and microchannels
Anand P. Roday/Michael K. Jensen
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2529-2547, 2009 |
|
|
Heat transfer characteristics of a vertical flat thermosyphon (VFT)
W. Srimuang/S. Rittidech/B. Bubphachot
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2548-2554, 2009 |
|
|
Effects of upper inflow area on pool boiling in vertical annulus with closed bottoms
Myeong-Gie Kang*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2555-2560, 2010 |
|
|
Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20)
Sungyong Park/Hwanam Kim/Byungchul Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2555-2564, 2009 |
|
|
Numerical and experimental studies on characteristic surface temperature variations of aluminum plates facing different directions
Jun-Hyuk Choi, Tae-Kuk Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2561-2566, 2010 |
|
|
Analysis of spatial vapor-phase distribution using the LIF method on multi-component fuel
J. K. Yoon/K. J. Myong/J. Senda/H. Fujimoto
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2565-2573, 2009 |
|
|
Examination of flame length for burning pulverized coal in laminar flow reactor
Jae-Dong Kim, Gyu-Bo Kim, Young-June Chang, Ju-Hun Song, Chung-Hwan Jeon*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2567-2575, 2010 |
|
|
Heat transfer characteristics of gaseous slip flow in a micro-channel
Chungpyo Hong*, Yutaka Asako, Koichi Suzuki, Yoon-Eui Nahm
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2577-2585, 2010 |
|
|
Theoretical modeling and numerical solution of stratified condensation in inclined tubes
Hamid Saffari*, Vahid Naziri
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2587-2596, 2010 |
|
|
3-D Simulation of the combustion process for di-methyl ether-fueled diesel engine
Jaeman Lim, Yongrae Kim, Sangyul Lee, Jaewoo Chung, Woo Kang, Kyoungdoug Min*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2597-2604, 2010 |
|
|
Nucleate boiling heat transfer in nanofluids with carbon nanotubes up to critical heat fluxes
Ki-Jung Park, Dong-Gyu Kang, Dongsoo Jung* and Sang Eun Shim
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2647-2655, 2011 |
|
|
A numerical study of the heat transfer and fluid flow of micro-channeled water block for computer CPU cooling
Jin Tae Choi, Oh Kyung Kwon* and Dong An Cha
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2657-2663, 2011 |
|
|
A numerical study of the heat transfer and fluid flow of micro-channeled water block for computer CPU cooling
Jin Tae Choi, Oh Kyung Kwon* and Dong An Cha
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2657-2663, 2011 |
|
|
Three-dimensional numerical analysis of proton exchange membrane fuel cell
Nader Pourmahmoud, Sajad Rezazadeh*, Iraj Mirzaee and Vahid Heidarpoor
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2665-2673, 2011 |
|
|
Thermal design criteria for long-term durability of ceramic catalyst substrates
Seok-Heum Baek and Seok-Swoo Cho
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2675-2682, 2011 |
|
|
Investigation of empirical correlations on the determination of condensation heat transfer characteristics during downward annular flow of R134a inside a vertical smooth tube using artificial intelligence algorithms
Muhammet Balcılar, Ahmet Selim Dalkılıç*, Berna Bolat and Somchai Wongwises**
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2683-2701, 2011 |
|
|
Large-eddy simulation and acoustic analysis of a turbulent flow field in a swirl-stabilized combustor
Jong-Chan Kim, Kwang-Hee Yoo and Hong-Gye Sung*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2703-2710, 2011 |
|
|
Microwave drying and moisture diffusivity of white mulberry: experimental and mathematical modeling
Duygu Evin*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2711-2718, 2011 |
|
|
Modeling the airside dynamic behavior of a heat exchanger under frosting conditions
Tieyu Gao and Jianying Gong*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2719-2728, 2011 |
|
|
Comparative analysis of the influence of labyrinth seal configuration on leakage behavior
Tong Seop Kim, Kyu Sang Cha
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2830-2838, 2009 |
|
|
An experimental study on the ignition and emissions characteristics of wallpapers
Yeonyi Choi, Inwhee Joe, Sung-eun Lee, Kyu-hyung Oh
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2839-2847, 2009 |
|
|
Analytical solution of non-Fourier heat conduction problem on a fin under periodic boundary conditions
H. Ahmadikia* and M. Rismanian
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2919-2926, 2011 |
|
|
Experimental study on CuO nanoparticles in distilled water and its effect on heat transfer on a vertical surface
Ramakrishna N. Hegde*, Srikanth S. Rao and R. P. Reddy
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2927-2934, 2011 |
|
|
Correlation analysis of factors influencing the electronic unit pump cycle fuel injection quantity under overall operating conditions for diesel engines
Yao Chong*, Fan Li-yun, Dong Quan, Song En-zhe and Tian Bing-qi
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2929-2939, 2012 |
|
|
Determination of deposit thickness in natural gas cooler based on the measurements of gas cooling degree
Mária Čarnogurská*, Miroslav Příhoda2 and Jiří Molínek
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2935-2941, 2011 |
|
|
The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber
Ainul Ghurri, Jae-Duk Kim, Hyung Gon Kim, Jae-Youn Jung and Kyu-Keun Song*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2941-2947, 2012 |
|
|
A numerical study on extinction and NOx formation in nonpremixed flames with syngas fuel
Kang Woo Chun, Hun-Jik Chung, Suk Ho Chung and Jae Hyuk Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2943-2949, 2011 |
|
|
CFD analysis of fin tube heat exchanger with a pair of delta winglet vortex generators
Seong Won Hwang, Dong Hwan Kim, June Kee Min and Ji Hwan Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2949-2958, 2012 |
|
|
A free-jet experimental study on the performance of a cavity-type ramjet
Jianguo Tan*, Yu Pan, Jianhan Liang and Zhenguo Wang
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2951-2957, 2011 |
|
|
Quantitative analysis of vehicle particle emission by using calibrated CPC system
Hongsuk Kim and Jinwook Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2959-2967, 2011 |
|
|
A computational study of a three-dimensional proton exchange membrane fuel cell (PEMFC) with conventional and deflected membrane electrode assembly
Nader Pourmahmoud, Sajad Rezazadeh*, Iraj Mirzaee and Sonita Motaleb faed
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2959-2968, 2012 |
|
|
Design and experimental evaluation of a mixed-mode continuous solar dryer for plaster molds
K. M. Aguilar-Castro, J. J. Flores-Prieto*, M. E. Baltazar-Lopez and E. V. Macias-Melo
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2969-2976, 2012 |
|
|
Entropy generation in hydrodynamic slip flow over a vertical plate with convective boundary
Adnan Saeed Butt*, Sufian Munawar, Asif Ali and Ahmer Mehmood
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2977-2984, 2012 |
|
|
Effect of channel and plenum aspect ratios on the performance of microchannel heat sink under different flow arrangements
S. S. Sehgal, Krishnan Murugesan* and S. K. Mohapatra
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2985-2994, 2012 |
|
|
Pressure drop and flow distribution characteristics of single and parallel serpentine flow fields for polymer electrolyte membrane fuel cells
Seung Man Baek, Dong Hyup Jeon, Jin Hyun Nam* and Charn-Jung Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2995-3006, 2012 |
|
|
Two-phase flow heat transfer of R-134a in microtubes
Yun Wook Hwang/Min Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3095-3104, 2009 |
|
|
Effect of antioxidants on the oxidative stability and combustion characteristics of biodiesel fuels in an indirect-injection (IDI) diesel engine
Kyunghyun Ryu
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3105-3113, 2009 |
|
|
A study on the measurement of temperature and soot in a constant-volume chamber and a visualized diesel engine using the two-color method
Yong-taik Han/Kyeong-hyeon Lee/Kyoung-doug Min
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3114-3123, 2009 |
|
|
Optimization of a rectangular profile annular fin based on fixed fin height
Hyung-Suk Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3124-3131, 2009 |
|
|
Combustion characteristics of a swirl chamber type diesel engine
Gyeung Ho Choi/Jae Cheon Lee/Tae Yun Kwon/Chang Uk Ha/Jong Soon Lee/Yon Jong Chung/Yong Hoon Chang/Sung Bin Han
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3385-3392, 2009 |
|
|
Effect of spatial variation of thermal conductivity on non-fourier heat conduction in a finite slab
Mohammad Goharkhah/Shahin Amiri/Hossein Shokouhmand
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3393-3398, 2009 |
|
|
Film condensation on horizontal tube with wall suction effects
Tong-Bou Chang/Wen-Yu Yeh/Go-Long Tsai
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3399-3406, 2009 |
|
|
Experiment on the performance improvement of air-to-air heat pump adopting the hot gas bypass method by outdoor fan speed variation
Jinho Lee/Ju-Suk Byun
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3407-3415, 2009 |
|
|
A numerical study on the flow and heat transfer characteristics in a noncontact glass transportation unit
Ik-Tae Im/Chan Woo Park/Kwang Sun Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3416-3423, 2009 |
|
|
Numerical simulation of structure and no formation of turbulent lean-premixed flames in gas turbine conditions
Sungmo Kang/Yongmo Kim/Kwan-Soo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3424-3435, 2009 |
|
|
Linear stability analysis of acoustically driven pressure oscillations in a lean premixed gas turbine combustor
Kyu Tae Kim/Domenic Santavicca
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3436-3447, 2009 |
|
|
Approximate method of determining the optimum cross section of microhannel heat sink
Omid Asgari/Mohammad Hassan Saidi
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3448-3458, 2009 |
|
|
|
|
|
 |
|
|
|
|
| |
|
|
| |
|
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org |
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org |
|
| |
|
|
